wholesale box jewelry factory Attachment of the 8583 protocol

wholesale box jewelry factory

1 thought on “wholesale box jewelry factory Attachment of the 8583 protocol”

  1. women's jewelry boxes wholesale 1. Definition of information types (Message Type)
    position drawing Location:
    Formats: fixed -length
    Type: n4
    Description:
    The first part of the data packet, definition, definition Types of data packets.
    The data type is set by the initiator of the packet, and the following requirements should be followed:
    The start part of the data packet must be the information type;
    The non -supported information type can give a refusal response.
    0100 authorized transaction
    0110 authorized transaction answer
    0200 financial transaction
    0210 financial transaction answer
    0240 query transaction
    0250 query transaction answer
    0410 Chongzheng transaction response
    0800 Management transaction
    0810 Management transaction reply
    2, bit map (bit map) -Base diagram and extension drawing
    position drawing position: 1
    formats format : Fixed
    Type: B16
    Description:
    If set the bitmap to 1, indicating the use of the extension, otherwise it means only the basic bitmap.
    If the use of a data domain, the corresponding bit position should be set in the bitmap. If you use 41 domains, the 41 digits of the bitmap need to be set to 1.
    In selection conditions: If you use 65 to 128 domains, you need to set the position domain to 1
    3, BIT02 main account (Primary Account Number)
    Long, LLVAR
    Type: N..22
    Description:
    The only confirmation of a basic account of a user transaction.
    Ilads to the bank's electronic service system involved multiple application systems, and the account length is up to 22 bits, so the 19th length of the original standard was changed to 22 bits.
    Processing code
    (CODE)
    Position diagram Location: 03
    Formats: fixed
    Type: n6
    Description: Used to describe transactions to customer accounts to customer accounts What kind of code causes.
    The processing code and information code can uniquely define a type of transaction.
    The processing code consists of the following three parts:
    position description
    1-2 transaction action code
    3-4 to pay the account type, for debit category, such as query, agency charges, transferred, transferred Field transaction.
    5-6 income account type is used for charging, transfer, etc.
    The:
    ff: Pay account
    tt: income account
    * depends on the host
    5, BIT04 transaction amount (amount,)
    position diagram Location: 04
    Format: Determination
    Type: N12
    Description: The transaction amount required by the account person to transaction does not include any processing and transaction costs.
    The indication of the amount is related to the currency code. It should be able to represent the smallest unit of the corresponding currency.
    , if "000" is used to represent the US dollar, it means 1.00 yuan; if it is used to represent Italian currency, it means 100 miles.
    For inquiries and other transactions, the transaction amount should be "".
    6, BIT06 trading date and time (date and time)
    position drawing position: 07
    format: fixed length,
    type: n10
    description: local transaction date and date and date Time
    7, BIT11 system tracking number (Systems Trace Audit Number)
    bit drawing Location: 11
    Formats: fixed
    Type: n6
    Description: Tracking of terminal transactions: Tracking of terminal transactions Number.
    The transaction initiating terminal filling in the terminal, with the trading date, time, and information type, which can only define the only transaction that defines a terminal. That is to say, on the same day, the system tracking number of the same type of transaction should be guaranteed to be different for one terminal. The system tracking number cannot be modified during the transaction, using this domain to match the return of requests and notification classes.
    The application system uses this domain to check whether the answering package of authorization, financial, automatic routine, settlement, management, and network management is the response to its request package.
    The system tracking number is not used to match automatic routine transactions, nor is it necessary to match pre -authorized transactions before pre -authorized consumption. Participate in 90 domains.
    For the banking electronic service system, its system tracking number is the transaction flow number.
    8, BIT12 local transaction time (Time, Local)
    position diagram Location: 12
    format: fixed length, HHMMSS
    Type: n6
    Description: transaction on the terminal on the terminal The time happened.
    The local transaction time cannot be changed during transaction processing. The local transaction time cannot be changed when automatic routine and storage forwarding.
    9, BIT13 Local transaction date (date, local)
    position diagram Location: 13
    format: fixed -length, mmdd
    Type: n4
    Description: transaction on the terminal on the terminal The time happened.
    The local transaction time cannot be changed. When automatic rushing, storage forwarding transactions, local transactions cannot be changed.
    10, BIT14 Validity Date (Date,)
    position drawing Location: 14
    Formats: fixed length, yymm
    Type: n4
    Description: Validity of the card, every year, month and month Monthly
    Due to the different magnetic formats of the card, the receiving line may not be valid for the card, and the authorized agency extracts the validity period of the card from the second magnetic trail of the card. If the card is notomed, the receipt line should be required to enter the validity period of the card.
    In selection conditions: 100, 200, 400, etc. If there are no 2 or 3 magnetic tracts, there must be this domain.
    11, BIT15 settlement date (Date,)
    position diagram Location: 15
    format: fixed -length, mmdd
    Type: n4
    Description:
    Bank electronics The time of the service system and host settlement, the format of the month.
    The transactions that occurred before the checkout date were settled on the same day.
    During the settlement, the checkout date is also used to calculate and transaction costs.
    12, BIT17 acquisition date (Date, Capture)
    position diagram Location: 17
    format: fixed -length, mmdd
    Type: n4
    Description: Obtain transaction from the host. The accounting date is usually used for liquidation of hosts and merchants.
    13, BIT18 merchant type (Merchants Type)
    position drawing Location: 18
    Formats: fixed -length

    Call types are used for finance, authorization transactions, and types for specifying service points. It mainly has the following uses:
    The longest time to determine the pre -authorized transaction;
    The legal limit for control;
    is transaction authorization processing, control network operation rules;
    fraud testing;
    It for merchant classification reports;
    The transaction cost processing.
    The corresponding national standards should be used according to the ISO8583 standard.
    The type of merchant type code:
    4215 mail service
    4511 Civil aviation
    4722 travel
    4782 bridge fee
    4789 other transport services
    4614 telecommunications service
    5542 refueling Station
    5812 restaurant
    5999 Shopping
    6010 financial institution -manual cash payment
    6011 financial institution -automatic cash payment
    6012 financial institutions -various services
    7011 hotels, hotel r r r r r r
    7299 Various personal services: laundry, beauty,
    7399 Various business services: parking lots, car rental, advertising, other services
    7699 Various maintenance services: maintenance, car washing, trailer
    7996 entertainment: movie movie , Theater, sports, game
    8099 medical services
    8111 legal services
    8999 Various professional services: accounting, education, decoration, engineering n Optional conditions: service point terminal trading must be available This domain.
    14, the BIT22 service point input method (Point-OF-Service Entry Mode)
    position diagram Location: 22
    Format: fixed
    type: n3
    Description: in in the description: in the description: in the description: in the description: in the description: in the description: in the description: in the description: in the description: Define the input method of PIN and PAN on the service terminal.
    The input method of the service point contains the following two aspects:
    position description
    1-2 PAN valid input method on the service terminal
    3 -3 Pin input on the service terminal on the service terminal Method
    PAN's input method Code as follows:
    PAN input method description
    00 does not know
    01 handmade
    02 magnetic card
    03 strip scanner (BAR)
    04 optical symbols Reader (OCR)
    05 integrated circuit card (IC card)
    PIN input method Code as follows:
    Pin input method description
    0 I don't know
    1 terminal can receive PIN
    2 Terminal cannot receive PIN
    In selection conditions: service point terminals must have this domain.
    15, BIT25 service point type code The service point type of the transaction
    If description: Below is the service point condition code supported by Cyberbank.
    2 Automatic teller machine (ATM)
    10 bank terminal (10)
    14pos
    20 telephone bank
    16, BIT32 obtaining mechanism logo
    position drawing Location: 32
    Format: LLVAR
    Type: N..11
    Description: In financial transactions, this domain indicates the logo code of the bank institution that occurs in the transaction
    Back this domain the same.
    17, BIT3 forward mechanism identification code
    position diagram Location: 33
    format: LLVAR
    Type: N..11
    Description: In financial transactions: This domain indicates that the logo code of the bank institution where the account is located
    In online management transactions 800/810, the domain contains the code of the transaction initiative.
    This packets must be the same as requesting the data packet.
    18, BIT35 dual -magnetic data (Track 2 data)
    position diagram Location: 35
    format: llvar
    Type: z.
    Description: Written in Card 2 Magnetic data. The data composition follows the ISO7811-1985 standard. The data contains the domain separators, but does not include the start, ending symbol, LRC, etc.
    The second magnetic trail that should detect cards in the card collection line meets international standards.
    It is to support international exchange receipts. In addition, any modification of the two magnetic tract data, such as modifying PAN's verification, validity period, service code, etc.
    19, BIT36 Trinity Data (Track 3 Data)
    position drawing Location: 36
    Format: lllvar
    Type: z ... 104
    Description: Written in the card Data from the three magnetic roads. The data should form an ISO4909 standard. The data contains the domain separators, but does not include the start, ending symbol, LRC, etc.
    Note: The length is described as 3 digits.
    20, the Bit37 retriever (Retrieval Reference Number)
    bit drawing Location: 37
    Formats: fixed
    Type: an12
    Description: retriever is used in the search nodes in it Make a financial, authorized, and automatic transaction at any time.
    The retraades do not require printing on the card holder's bill. Its main purpose is to define a data item between the receiving bank and the authorization bank to track and retrieve transactions. The authorized agency can print the retriever's number on the customer's statement.
    In search nodes are allocated by the closing line.
    In selection conditions: can be included in the transaction request of the receiving mechanism. If there is in the transaction request, the original should be returned in the original.
    21, BIT38 authorization code ()
    position drawing Location: 38
    Formats: fixed -length
    type: an6
    Description: The return code returned by the transaction authorization agency.
    The authorization code is used to authorize the credit card authorization on the service point;
    The authorization agency can choose this domain according to the network operation regulations.
    22, BIT39 Return Code
    position drawing Location: 39
    Formats: fixed -length
    coding.
    The return code is used to explain the processing status of the authorized institution to the financial (authorized) transactions; it is also used to indicate the reasons for the positive transaction of automatic positive transactions; Transaction requests such as network management.
    The return code should be as accurate as possible, and the problems and status that you encounter should be as clear as possible. The network exchange host and the receiving shop may charge different transaction processing fees according to different returns and perform different processing.
    23 domain 41 card terminal identification code
    Card Acceptor Terminal n variable properties
    ANS8, 8 -bit fixed -length letters, numbers and special characters
    domain description
    The terminal identification code of the card. The identifier must be a terminal in the network of the agency.
    Ip usage
    If the terminal identification code is less than eight bits, then press the left and the right to fill the space.
    The terminal identification code is distributed by the agency. All card transaction requests must bring the terminal identification code and remain unchanged throughout the transaction cycle.
    24 domain 42 card logo code
    Card Acceptor code
    variable properties
    ans15, 15 -digit long letters, numbers and special characters
    domain description
    The logo code of the card, that is, the merchant code.
    Ip usage
    For all card transactions, the domain must appear in this domain, and it remains unchanged throughout the transaction cycle.
    For some self -service transactions, such as ATM cash, without a merchant or unable to give meaningful values, the domain is filled with full zero.
    25 domain 43 card party name address
    Card Acceptor name/local n variable properties
    ans40, 40 -bit long -digit letters, numbers and special characters
    description
    's name address of the deck, that is, the name of the merchant and the location.
    If itself
    Mill filled by the acceptor or merchant, CUPS does not process any processing. For all card transactions requests, this domain must appear, and it remains unchanged throughout the transaction cycle.
    Muke names up to 40 byte length, if less than 40 byte lengths, then repay the space.
    26 domain 44 additional response data
    response data
    variable properties
    ans. The additional response data of special characters)
    D domain description
    The mark on the distribution of the approved exchange.
    This can be used to identify the original transaction by the dealer.
    Ip usage
    The additional response data of the vessel must be effective characters. The derivatives are loaded in response to the response message when approved. The acceptor and CUPS do not deal with this domain.
    The area is optional.
    If the response message approved by the sessor needs to be received, it needs to be caused by righteousness.
    27 domain 45 first magnetic tract data
    track 1 data
    variable properties
    z 79 (LLVAR), 2 byte length value maximum 79 bytes (characters) The first magnetic tract data
    is described by the domain
    The first magnetic tract data on the card. Including separators, but excluding the starting symbols and end symbols, and LRC characters. rn28 域48 附加数据-私有rn Data Privatern变量属性rnansb...512(LLLVAR),3个字节的长度值 最大512个字节(字母、 Private additional data of numbers, special characters, binary numbers)
    domain descriptions
    This This domain provides special business data transmission in the request message.
    29 domain 49 trading currency code
    currency code,
    variable properties
    an3, 3 -digit long letters, numbers
    Trading amount) Types of currency. 30 domain 50 liquidation currency code
    currency code,
    variable properties
    an3, 3 -digit long letters, numbers
    domain descriptions
    Clene currency types. Money and currency for indicating domain 5 (liquidation amount).
    If in the UnionPay card cross -border transaction of UnionPay independent liquidation, this domain is filled in by CUPS; the region is filled in by the international credit card company in the UnionPay non -independent liquidation foreign card receipt transaction. Essence

Leave a Comment