2 thoughts on “statement wholesale jewelry 192.168.1.103 router settings”
Bryan
wholesale jewelry chicago clark st ASDL Internet The method of use of four -port broadband router is: . The Internet hardware has one broadband cat, one four -port broadband router, and the two ribbon network cables are directly connected. . The hardware installation 1. The output cable of the broadband cat is inserted to the WAN port of the broadband router, and the router LAN port is connected to the computer network card with a straight twist network cable. 2, start the power of broadband cats and routers. . Configuration router The TP-Link's soho RT402 broadband router as an example, do the following settings (according to the router manual): 1, in the address bar of the IE window, enter 192.168. 1.1, "turn to" to open to the dialog box required to enter the user name and password. 2. Enter "admin" in the username and password text box to determine the configuration interface of the opening device. 3, select "WAN port", "PPPOE protocol" in the routing network connection wizard (be careful not to choose dynamics and static), then enter your telecommunications broadband account and password, select in the advanced options: Automatically dial -up dial Essence After configuration, turn off the route of the route and restart. . Configure network computers The fixed IP address is allocated to the two computers. 1. Open the "Local Connection" attribute, double -click on the TCP/IP protocol, come out a dialog box, select "Use a fixed IP address" in the dialog box, enter 192.168.1.2 in the IP address, the subnet mask 255.255.255.0, gateway 192.168.1.1, main DNS192.168.1.1, determined, the other computer except for the IP address of 192.168.1.3, the same columns are the same. 2, broadband connection, both thinks automatic, so that the two computers can access the Internet at the same time or can surf the Internet alone.
The method of automatic obtaining IP: The method of use of four -port broadband router is: , internet hardware one of the four -port broadband router, directly connected to the two twist network cables two Essence . Hardware installation 1. Put the company's network cable to the WAN port of the broadband router, and connect the router LAN port with the computer network card with a straight twist network cable. 2, start the power of broadband cats and routers. . Configuration router The TP-Link's soho RT402 broadband router as an example, do the following settings (according to the router manual): 1, in the address bar of the IE window, enter 192.168. 1.1, "turn to" to open to the dialog box required to enter the user name and password. 2. Enter "admin" in the username and password text box to determine the configuration interface of the opening device. 3, select "WAN port" in the routing network connection wizard. Select dynamic IP, enter DNS . Configure network computers to allocate a fixed IP address to the second computer (you can also choose to get it by yourself). 1. Open the "Local Connection" attribute, double -click on the TCP/IP protocol, come out a dialog box, select "Use a fixed IP address" in the dialog box, enter 192.168.1.2 in the IP address, the subnet mask 255.255.255.0, gateway 192.168.1.1, main DNS192.168.1.1, determined, the other computer except for the IP address of 192.168.1.3, the same columns are the same.
ruby jewelry wholesale Do cats connect wireless routers, according to the following method: 1, wireless router plug in power, do not connect the cat first, computer connect to the wireless router at a LAN port ; 2, The browser address bar input the router gateway address (there are labels behind the router), enter the login user name and password to enter the setting page; 3, set in the method of PPPOE (ADSL virtual dial -up), enter the Internet account and password; r 4, set the SSID, encryption method, and passwords; 5, save, restart; 6, after setting, connect the network cable that the cat Lan port is connected to the WAN port of the wireless router.
wholesale jewelry chicago clark st ASDL Internet
The method of use of four -port broadband router is:
. The Internet hardware
has one broadband cat, one four -port broadband router, and the two ribbon network cables are directly connected.
. The hardware installation
1. The output cable of the broadband cat is inserted to the WAN port of the broadband router, and the router LAN port is connected to the computer network card with a straight twist network cable.
2, start the power of broadband cats and routers.
. Configuration router
The TP-Link's soho RT402 broadband router as an example, do the following settings (according to the router manual):
1, in the address bar of the IE window, enter 192.168. 1.1, "turn to" to open
to the dialog box required to enter the user name and password.
2. Enter "admin" in the username and password text box to determine the configuration interface of the opening device.
3, select "WAN port", "PPPOE protocol" in the routing network connection wizard (be careful not to choose dynamics and static), then enter your telecommunications broadband account and password, select in the advanced options: Automatically dial -up dial Essence After configuration, turn off the route of the route and restart.
. Configure network computers
The fixed IP address is allocated to the two computers.
1. Open the "Local Connection" attribute, double -click on the TCP/IP protocol, come out a dialog box, select "Use a fixed IP address" in the dialog box, enter 192.168.1.2 in the IP address, the subnet mask 255.255.255.0, gateway 192.168.1.1, main DNS192.168.1.1, determined, the other computer except for the IP address of 192.168.1.3, the same columns are the same.
2, broadband connection, both thinks automatic, so that the two computers can access the Internet at the same time or can surf the Internet alone.
The method of automatic obtaining IP:
The method of use of four -port broadband router is:
, internet hardware
one of the four -port broadband router, directly connected to the two twist network cables two Essence
. Hardware installation
1. Put the company's network cable to the WAN port of the broadband router, and connect the router LAN port with the computer network card with a straight twist network cable.
2, start the power of broadband cats and routers.
. Configuration router
The TP-Link's soho RT402 broadband router as an example, do the following settings (according to the router manual):
1, in the address bar of the IE window, enter 192.168. 1.1, "turn to" to open
to the dialog box required to enter the user name and password.
2. Enter "admin" in the username and password text box to determine the configuration interface of the opening device.
3, select "WAN port" in the routing network connection wizard. Select dynamic IP, enter DNS
. Configure network computers
to allocate a fixed IP address to the second computer (you can also choose to get it by yourself).
1. Open the "Local Connection" attribute, double -click on the TCP/IP protocol, come out a dialog box, select "Use a fixed IP address" in the dialog box, enter 192.168.1.2 in the IP address, the subnet mask 255.255.255.0, gateway 192.168.1.1, main DNS192.168.1.1, determined, the other computer except for the IP address of 192.168.1.3, the same columns are the same.
ruby jewelry wholesale Do cats connect wireless routers, according to the following method:
1, wireless router plug in power, do not connect the cat first, computer connect to the wireless router at a LAN port
;
2,
The browser address bar input the router gateway address (there are labels behind the router), enter the login user name and password to enter the setting page;
3, set in the method of PPPOE (ADSL virtual dial -up), enter the Internet account and password; r
4, set the SSID, encryption method, and
passwords;
5, save, restart;
6, after setting, connect the network cable that the cat Lan port is connected to the WAN port of the wireless router.